Upload your drawings and BIM models. Ask anything in plain English. Get full compliance reports in minutes, every check cited against your drawings and the code.
Do habitable rooms have window openings that meet NCC minimum natural light requirements based on floor area?
All habitable rooms significantly exceed the 10% minimum requirement. Bedrooms 3 and 4, in particular, provide nearly three times the required natural light area.
An AI platform that reads your construction drawings and BIM models to check them against building codes, regulations, or your own internal quality standards.
PDFs, IFC, Revit, DWG. Floor plans, elevations, schedules, sections. We read them all.
"Do these windows comply?" "What’s the fire rating on this wall?" Answers with cited evidence.
Full compliance audit reports in minutes. Every check cited against your drawings and the code.
Ask questions in plain English. The AI retrieves data from your drawings, BIM model, and regulations to answer, and shows you exactly where each answer came from.
I'm designing a residential building in Melbourne. What are the minimum ceiling height requirements?
For residential buildings in Melbourne, the National Construction Code requires a minimum ceiling height of 2.4 m for habitable rooms such as living rooms, bedrooms, and kitchens.
For non-habitable spaces: bathrooms, laundries, and corridors are 2.1 m minimum. For sloping ceilings, at least two-thirds of the floor area must meet the required height.
Run a full audit across every section of the relevant codes, or test against your own company-specific QA guidelines. Detailed pass and fail per requirement, cited against your actual drawings.
| Part | Topic | 2019 | 2025 | Change |
|---|---|---|---|---|
| H1 Structure | Footings, masonry, framing, glazing | No change | ||
| H2 Damp | Damp-proof courses, flashings | No change | ||
| H2 Condensation | Pliable membrane, vapour management | Class 4 membrane now specified | ||
| H3 Fire Safety | Boundary walls, smoke alarms | No change | ||
| H4 Wet Areas | Waterproofing to AS 3740 | Alternate DTS path valid | ||
| H6 Energy Efficiency | Star rating referenced | 7-star NatHERS + Whole-of-Home required | ||
| H8 Livable Housing | Not in NCC 2019 | N/A | New Part, 5 items non-compliant |
Upload any regulation document you have the right to use. Our AI reads it and checks your drawings against it, across every major compliance domain.
Fire ratings, separation walls, egress paths, smoke detection.
Load paths, bracing, member sizes, foundation details.
Insulation values, glazing U-values, NatHERS star ratings.
Door widths, ramp gradients, bathroom clearances, Livable Housing.
Sill heights, safety glazing, fall protection, ventilation areas.
Wet area membranes, termination heights, flashing details.
Plus:any regulation you have the right to use. NCC, IBC, Eurocodes, and even your company's own design standards.
See it for NCC 2025 compliance or BIM & IFC models.
Bring the files you already work in. More native formats are landing through 2026.
Drawing sets, specifications, council documents.
BIM models from ArchiCAD, Revit, Tekla, and others.
Native Revit files, direct model access.
AutoCAD drawings, 2D plan reading.
Working in BIM? See how UptoCode handles BIM & IFC compliance checking.
Construction projects are fragmented by nature, with multiple consultants and stakeholders working across the same set of plans.
UptoCode brings everyone into one collaborative workspace, so your designer, engineer, energy consultant, and certifier communicate in a single thread. Align decisions early and keep the project moving in the right direction from day one.
Whether you sign off, build, design, or approve, UptoCode removes the hours of manual code checking from your day.
Run compliance checks in 5-10 minutes instead of 6+ hours. Handle more projects, catch more issues, reduce your liability.
Learn moreVerify compliance before construction starts. Avoid costly rework, delays, and defect claims down the line.
Learn moreVerify compliance at the design stage, before drawings go out. Avoid rework, delays, and defect claims later.
Learn moreProcess more applications with consistent, documented compliance checking. Reduce backlog and approval times.
Learn moreStart free. Upgrade when you're ready. No lock-in contracts.
See full plan details on the pricing page.
Everything you need to know about checking drawings and BIM models with UptoCode.
PDF and IFC are live today, covering drawing sets, specifications, council documents, and BIM models from ArchiCAD, Revit, Tekla, and others. Native Revit (RVT) access lands in Q3 2026 and AutoCAD (DWG) in Q4 2026.
Yes. You can upload multiple PDFs into one project to compare revisions and ask questions across several documents without merging them first. You can also use the screenshot tool to capture any area of a drawing and get a context-aware answer about that exact detail.
Upload your drawings and BIM models along with the regulations you have the right to use. UptoCode extracts dimensions, materials, fire ratings, sill heights, and more from both the drawings and the BIM data, then cross-references everything against the relevant code and returns a structured pass/fail report cited to your files.
Any regulation you have the right to use. The NCC, IBC, Eurocodes, local council requirements, and even your company's own internal QA and design standards. The AI reads the document you provide and checks your drawings against it.
Yes. UptoCode checks drawings and BIM models against the Saudi Building Code, UAE codes such as the Dubai Building Code, the National Building Code of Canada, and any code you upload. It works in Arabic as well as English, with every finding cited to the clause and the drawing.
A question in chat is answered in seconds, grounded in your project files. A full compliance audit across an entire regulation typically completes in minutes, instead of the hours manual review takes.
Yes. Upload your company-specific quality assurance guidelines as a document and UptoCode will verify your drawings against them the same way it checks against published codes, with every finding cited.
Yes, a card is required to start on Individual or Team. There are no lock-in contracts, so you can cancel anytime.
Start for free. Upload your first project. See what UptoCode catches in minutes.
Full platform access
Questions? Talk to us at vinuri@uptocode.ai
